|
ServoCAT GOTO Track
Dobsonian Retrofit Kits NEW!
Our new Dobsonian retro kits are designed to fit existing Obsession style and close clone DOB telescopes. Size: 15-40” models.
(see ServoCAT Jr. for smaller scopes.)
Includes:
• ServoCAT-Sky
Plug-n-Play box
• 2 Deluxe geared motors
• StellarCAT Handpad
• Manual controls for AZ and ALT axis manual operation
• All hardware, ty-wraps, ty-downs, etc, mounting instructions, mounting template.
• All cables
Only $1,599. 15-20”
Only $1,699. 21-29”
Only $1,799. 30-36”
CALL 37-50”
What you need to add:
• Argo Navis or Sky Commander DSC with its installed encoders
• precisely round Ground Board
Obsession Owners Note:
True Obsession owners receive their kit already programmed with default values that in most cases will allow “no
commissioning - no software install” capability. Other scopes can be default set as well. And to non-Obsession owners - this does NOT mean
that the ServoCAT is only for Obsessions! Not at all. It has been installed on virtually all brands and most sizes of scopes. YOU can install it
on YOURS!
PAYMENT PLAN OPTION
We often have sales - call for information on these. They are advertised on various internet sites but rarely is it "mentioned"
here... write or call for more info! Also note we do offer an interest free payment plan for US buyers. Call for details on this plan - get into a ServoCAT SOONER
rather than later!
Now the ServoCAT can be used on 2 scopes!
|
|
ServoCAT GOTO Track
Do-It-Yourself Kit
Options:
Option 1
For standalone try our Plug-n-Play, Sky. (For DOB, EQ owners that are Do it yourself-ers)
Includes:
• ServoCAT- Sky
• Plug-n-Play box
• 2 Std Servo Motors
• StellarCAT Handpad
• All cables
Only $699.
Option 2
For standalone try our
Plug-n-Play, Sky.
Includes:
• ServoCAT-Sky
• Plug-n-Play box
• 2 Servo-gearbox
• StellarCAT Handpad
• All cables
Note: 60.5 is great for EQ's!
393:1
Only $1,299.
121:1 Only $1,199.
60.5:1 Only $999.
Mounting Bracket
For installing ServoCAT to the front (tall) board of your telescope. Only $25.
CATpaw Wireless
Handpad
Kit: assembly is easy, instructions included. Does require some soldering.
Only $269.
Argo Navis
Digital Setting Circles
$489*. ($10 S&H)
If ordered with (or after) ServoCAT: includes FREE Serial Programming cable for Argo Navis ($20 Value!)
*Based on exchange rate of 0.94 - find out the REAL price BEFORE you order it from others as the exchange rate is not always updated at other sites!
Required DSC component pricing
|
|
Ground Boards
Scope Size:
8” - 14” (Jr.):
Only $129. ($30 S&H)
15” - 22”:
Only $169.
($35 S&H)
23” - 26”:
Only $219.
($55 S&H)
27” or larger: Please call.
Powered Ground Board Ground Board option required.
Only $129.
Powered Ground Board on your provided ground board
Includes:
• Power distribution rail
• Cables
• Power transfer system
• Center pivot post hardware
Only $179.
AC Power Supply
100 - 264VAC input 50/60 Hz;
12V regulated output
66W (15V @ 4.4A equivalent to 12V @ 5.5A) output for ServoCAT, DSC, fan
Only $75.
Wireless 232
Connect your PC planetarium program to the ServoCAT seamlessly! Complete with AC adapters for both units. One 12V power cord. ServoCAT PC adapter to plug in.
Only $329. ($10)
GOTO Button
Allows "remote" gotos without the handpad.
Only $29.
Remote Status Unit
Allows remote location of the diagnostic LEDs/Switches.
Only $89.
|
|
CATtail: DSC Stalk
Standard-equipped for Argo Navis, Sky Commander, available upon request.
Unwired
Includes mounting block with Teflon Mirror anti-slip pad, 30” stalk, formed Lexan support and all hardware. Also includes second teflon pad for mirror box anti-slip)
Only $109.
Wired:
Includes all the above plus cabling for Encoder: std 8 pin wide phone jack [RJ45]; Serial from Argo [RJ11 phone]; RCA female for AN/SkyComm ext DC power: Inline jack for ServoCAT handpad)
NEW!Now includes our "Protection Board". Protection against static for the encoders and the serial port, resetable fuse on the DSC power.
Only $179.
Stalk custom mating cable length for encoders & ServoCAT serial, AN power:
Just $30.
Stalk custom mating DC ext. power with RCA end:
Just $15.
AutoCAL cable for SuperProgram:AutoCAL
$15.
USB <> RS232 Converter
Tested to work! $40.
Basic Install at our facility
(call):
Up to 20”: Only $375.
25”: Only $475.
Installation also available in
Charlotte NC., CA, TEX
More Options
& Accessories
|
|
